Mineral Pool Test Strips
Use these test strips to test for the essential water chemistry parameters common to all pools and hot tubs:
- pH (7.2 – 7.8)
- alkalinity (80ppm – 100ppm)
- Calcium hardness (200ppm – 400ppm)
Low Chlorine
Mineral Pools require less chlorine than salt water, chlorine or other pools.
- Chlorine (0.5ppm to 1ppm)
Instructions
- Dip the strip into the water and remove immediately
- Do NOT shake excess water off. Hold the strip horizontally for 15 seconds
- Compare against the color chart and read immediately
Warning
- Keep wet fingers out of the bottle
- Avoid touching or polluting the test area of the strip
- Close cap tightly after removing strips
- For best results, read in natural daylight
- Store in a cool, dry place
